COMMENCEMENT OF 10 WELL DRILL PROGRAM & FINANCIAL HEDGING
Calgary, Alberta – February 7, 2018 – Touchstone Exploration Inc. (“Touchstone” or the “Company”) (TSX / LSE: TXP) announces the commencement of its ten well onshore drilling program in the Republic of Trinidad and Tobago which is expected to be fully funded by current cash balances and cash flows from operations.
The Company spudded the first well of the program on its Grand Ravine WD-4 block on February 3, 2018. The PS-602 well is being drilled to an approximate total depth of 5,500 feet, targeting the Upper and Lower Forest formations. The Forest sands are the main producing formation of the property, and the well is targeting a significant undrained portion of the block identified by surrounding well logs and production. The well is currently at 1,125 feet and the Company is setting surface casing. It is anticipated to reach total depth within the next ten days. The well is expected to be placed on production within 14 days from completion of logging and casing. This well will satisfy the remaining minimum work obligations stipulated under the WD-4 Lease Operating Agreement (“LOA”).
In conjunction with the spudding of the first well, the Company is coordinating final governmental inspections of a second drilling rig that is anticipated to commence drilling operations on the Forest Reserve WD-8 block prior to the end of February. The second rig is expected to drill two wells on WD-8 from two separate locations. Both wells will target the Cruse and Forest formations in an area that has significantly less drilling density than much of the property. While these two wells are being drilled from individual surface locations, the Company has designed each surface location to accommodate future drilling if the results justify further development.
The Company has also begun constructing a multi-well pad on its Coora 2 property that will provide the surface location for two wells to be drilled. These wells will target the Cruse and Forest formations at depths up to 4,500 feet. The wells are follow-ups to the successful 2014 drilling program in the area where three wells were drilled. Upon completion of these two wells, all Coora 2 LOA minimum work obligations will be satisfied.
Following the completion of the two wells in Coora 2, the Company expects to drill two wells on its Coora 1 block from a single surface location as follow-ups to the two successful wells drilled in 2017. One of the two wells will be targeting uphole zones that are identified in the CO-369 well that cannot currently be produced from the same well bore under existing regulations. As the CO-369 well continues to produce at approximately 200 barrels of oil per day, the Company will accelerate the recovery of unbooked uphole sands through the drilling of the offsetting development well. The second well on the location will be targeting a deeper horizon identified in a separate fault. These wells are beyond the commitments stipulated under the Coora 2 LOA as all minimum work obligations were previously met by drilling and workovers completed in 2017.
Further, the Company is working on submitting the required documents for the final three locations that are expecting to be drilled on the Fyzabad and WD-4 blocks. The Company is targeting to complete the 10 well program by August of 2018.
Paul Baay, President and Chief Executive Officer, commented:
“The commencement of our ten well drilling program is further evidence of Touchstone transitioning its extensive reserves into production and cashflow. It is extremely pleasing to be able to update the market, and our valued shareholders, with more positive news that we are delivering against our ambitious growth plans. If conditions allow, we hope to drill additional wells prior to year-end.”
On January 23, 2018, the Company purchased US$55.00 Brent ICE crude oil put options effective March 1, 2018 through December 31, 2018. The Company protected 500 barrels of day of production during this period, representing approximately 33% of current field estimated production. Touchstone will continue to monitor the forward commodity price curve and opportunistically hedge future production volumes to mitigate possible commodity price volatility and protect the funding of the approved drilling program.
All information is provided on an as-is basis. Where we allow Bloggers to publish articles on our platform please note these are not our opinions or views and we have no affiliation with the companies mentioned