ECR Minerals plc (LON:ECR), the precious metals exploration and development company, is pleased to announce the receipt of significant gold assays in relation to the reverse circulation (RC) drilling programme recently completed at the Blue Moon prospect, which is located within the Bailieston gold project area in the state of Victoria, Australia.
Published 6th March 2019
ECR’s wholly owned Australian subsidiary Mercator Gold Australia Pty Ltd (“MGA”) has 100% ownership of the Bailieston project.
Significant intersections from three of twelve RC holes drilled by MGA at Blue Moon are reported below. Assay results for the remaining nine holes are pending. A map showing the location of drill holes completed at Blue Moon by MGA may be viewed through the following link:
Readers are advised to review the Company’s announcement dated 28 January 2019 regarding the commencement of the Blue Moon drill programme, which can be viewed through the following link:
Readers are also advised to review the Company’s further progress update announcement dated 28 February 2019 which highlighted the presence of visible gold in drill cuttings from Blue Moon, which can be viewed through the following link:
Following the reporting of visible gold from hole number BBM007 (see 28 February 2019 announcement), assay results received for BBM007, BBM006 and BBM004 have shown both high grade intervals and significant widths of anomalous gold grades;
Significant intersections are reported in Table A below and include 2 metres @ 17.87 g/t gold from 57 metres down hole in BBM007 within a zone of 15 metres at 3.81 g/t gold from 51 metres;
In addition, BBM006 returned 3m @ 3.88 g/t gold from 170 metres down hole within a zone of 11 metres @ 2.42 g/t gold from 169 metres;
These results from Blue Moon indicate that a high grade zone exists within the target sandstone host and further results and work will be required to understand any concentration of mineralisation within shoots.
Craig Brown, Chief Executive Officer of ECR Minerals commented: “These results quantify the field geologists’ assessment of visible gold at Blue Moon during drilling of BBM007 and provide great encouragement for the Company and the Bailieston gold project.
To achieve an intersection of 17.87g/t gold over 2 metres is notable. But also of significance is that this was part of an intersection of 15 metres at 3.81g/t gold from relatively shallow depth.
The Company awaits further results from drilling across Blue Moon, Creswick and Black Cat and will provide updates to the market as appropriate.”
MGA completed three diamond drill holes (BBM001-3) at the Blue Moon prospect in 2018. The results of this drilling were announced on 6 July 2018, and the relevant announcement can be viewed here:
As previously announced, gold mineralisation at Blue Moon is associated with sandstone plus dykes intruding the sandstone and adjacent to it.
MGA’s 2018 diamond drilling did not obtain fresh sample from beneath the oxide zone. The twelve reverse circulation (RC) holes completed recently (BBM004-15) aimed to intercept the sandstone on 50 metre spacing across three sections and to gain samples from beneath the oxide zone.
BBM004 & 6 intercepted the host sandstone beneath the oxide zone. Logging recorded estimates of up to 4% pyrite and 2% arsenopyrite with minor quartz. No visible gold was seen in these samples.
The base of the oxide zone was at 64 metres in BBM007 within the host sandstone. Visible gold was seen in three samples (3 metres @ 13.4 g/t gold from 57 to 60 metres). It is possible these are elevated gold values as a result of supergene enrichment close to the base of the oxide zone.
Significant intersections from Q1 2019 RC drilling at the Blue Moon gold prospect
EL5433, Victoria, Australia
NB: intersections reported are apparent width.
COMPETENT PERSON STATEMENT
The information in this announcement that relates to Exploration Results is based on information compiled by Dr Rodney Boucher of Linex Pty Ltd. Linex Pty Ltd provides geological services to Mercator Gold Australia Pty Ltd, including the services of Dr Boucher, who has a PhD in geology, is a Member and RPGeo of the Australian Institute of Geoscientists and is a Member of the Australian Institute of Mining and Metallurgy. Dr Boucher has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Dr Boucher consents to the inclusion in the announcement of the material based on his information in the form and context in which it appears.
All information is provided on an as-is basis. Where we allow Bloggers to publish articles on our platform please note these are not our opinions or views and we have no affiliation with the companies mentioned