Coro Energy PLC (LON:CORO) Tambak-2 Well Spud Appraisal Drill – Mako gas field

Coro Energy plc, the Southeast Asian focused upstream oil and gas company, is pleased to provide an operational update in relation to the drilling campaign in the Duyung Production Sharing Contract (“PSC”) in the West Natuna basin, offshore Indonesia, in which Coro holds a 15% interest.

As previously reported, the drilling rig Asian Endeavour 1 was mobilised from Singapore on 24th September 2019 and has been on location since Monday 30th September. Pre-loading of equipment and supplies for the two well programme has now completed and drilling of the Tambak-2 well has commenced.

The Tambak-2 well is primarily designed as an appraisal of the southern area of the Mako gas field. The well is a very large step out (over 13 km) south the Mako South-1 location, will be drilled as a vertical well and is prognosed to intersect the intra-Muda reservoir up dip from the Mako South-1 well, at a depth of approximately 380 metres below sea level. The well is planned to total depth at approximately 595 metres below sea level. A full reservoir evaluation programme is planned, including an extensive suite of logs, coring and open hole testing, in order to derive as much information as possible about the Mako gas field reservoir.

An independent review by Gaffney Cline & Associates ascribed gross 2C resources of 276 Bcf (48.78 MMboe) of recoverable dry gas in the Mako field with gross 3C resources of 392 Bcf (69.3 MMboe) representing additional field upside. Management estimate that in the event of the Tambak-2 well resulting in a successful appraisal of the southern area of the Mako gas field, approximately 100 Bcf of gross contingent resources will be added to the 2C category from the 3C category. This would represent very significant, low risk, value addition to what the Board considers an already attractive commercial development opportunity and would further enhance the appeal of the field as a source of gas for the Singaporean market.

READ
Oracle Power PLC (LON:ORCP) Share Price movement

Total time to drill, core, log and test is estimated to be approximately 33 days, after which the rig is then planned to immediately move to the Tambak-1 location. Coro is fully funded for its share of costs associated with the drilling campaign.

 


Linking Shareholders and Executives :Share Talk

If anyone reads this article found it useful, helpful? Then please subscribe www.share-talk.com or follow SHARE TALK on our Twitter page for future updates.

Terms of Website Use

All information is provided on an as-is basis. Where we allow Bloggers to publish articles on our platform please note these are not our opinions or views and we have no affiliation with the companies mentioned

Malcare WordPress Security